Skip to content

FireProtect-SW 60 access door for installation in one side cladding shaft walls and solid walls

with square lock

  • Variably installable irrespective of wall thickness
  • Door panel removable for wall mounting
  • The screw head-free surface saves filling work
  • With an all-round seal, smoke-tight and sound insulation tested

Fire tested from the shaft and room sides in accordance with NF EN 1634-1. Tested for airborne sound insulation EN ISO 10140-2. Standard-sound level difference: 48 dB (size 400 x 400 mm).

The FireProtect-SW 60 access door is especially suited for applications in shaft wall systems, installation shafts and facing formwork in drywall constructions. The mounting frame and the door panel are in galvanized sheet steel and are reinforced on the back with fire protection panels. In the frame there is an all-round hollow section seal. Thus, the door is smoke-tight.

The door panel, removable for installation, and the pre-machined counterbores in the mounting frame simplify the wall mounting. The door panel is firmly fitted after installation. The screw head-free door panel surface saves timeconsuming filling work.

Clear opening: : A3 x B3
Construction opening dimension: A1 +5 mm / B1 + 5 mm

 Data sheet (PDF)
 Installation instruction (PDF)

Fire resistance class EI 60 (i <-> o) Plasterboard inlay DF according to DIN EN 520 - mineral wool in accordance with EN14303, 2 x 15 mm

Order no.Size
A x B (V)
In­stall­ation di­men­sion
A1 x B1
Out­er dim­en­sion
A2 x B2
Clear width
A3 x B3
T1 / T2
22-401300 x 300304 x 304304 x 322180 x 20048 / 624.3
22-402400 x 400404 x 404404 x 422280 x 30048 / 627.2
22-403500 x 500504 x 504504 x 522380 x 40048 / 629.8
22-404600 x 600604 x 604604 x 622480 x 50048 / 6213.9
22-405600 x 800604 x 804604 x 822480 x 70048 / 6220.4
22-408600 x 1200604 x 1204604 x 1222480 x 110048 / 6229.7
All dimensions are in mm / (V) = lock side
Back To Top