Skip to content

AluNova without inlay access panel without inlay

for on-site installation of 10 mm gypsum plasterboard inlays

with circumferential rubber lip seal, concealed snap locks and self-adjusting safety catch arms, for ceiling and wall installation

  • For use of on-site inserts (10 mm)
  • Safety catch arms, self-adjusting
  • All-round lip seal protects against dust and draughts

The access panel AluNova (without insert) is intended for installation in walls and ceilings in dry construction. The flap lid can be fitted with an insert on site. The flap lid is secured on both sides by self-adjusting safety catch arms. The safety catch arms guarantee that the flap lid is caught every time it is opened. Opening and closing is done by pressing on the flap lid and two concealed snap locks. Mounting frame and door profile frame made of torsion-resistant extruded aluminium profile in anodised quality.
Detachable panel lid.

Assembly instruction:
For wall installation, the locks must be positioned upwards.

Clear opening: A3 -32 mm x B3
Construction opening dimension: A1 +5 mm / B1 +5 mm

 Data sheet (PDF)
Installation instruction (PDF)

AluNova without inlay, with rubber lip seal - for on-site installation of 10 mm gypsum plasterboard inlays

Order no.Size
A x B (V)
In­stall­ation di­men­sion
A1 x B1
Out­er dim­en­sion
A2 x B2
Clear width
A3 x B3
T1 / T2
22-140200 x 200200 x 200239 x 239191 x 19110,5 / 310.4
22-141300 x 300300 x 300339 x 339291 x 29110,5 / 310.5
22-142400 x 400400 x 400439 x 439391 x 39110,5 / 310.6
22-143500 x 500500 x 500539 x 539491 x 49110,5 / 310.8
22-144600 x 600600 x 600639 x 639591 x 59110,5 / 310.9
All dimensions are in mm / (V) = lock side
Back To Top